Brake repair
in Union
Brake noise, vibration or worn pads? Call our brake shop on Magie Ave in Union for an inspection and a quote for your vehicle. We check pads, rotors and related components, explain what needs attention, and ask for approval before repair work.
Call (908) 569-1787Tell us the vehicle, front or rear brakes, and the noise or pedal symptoms. If you have your own parts, ask the shop to confirm compatibility and labor before visiting.
1351 Magie Ave, Union · repair bays on the gas-station lot. Directions & visit details

Pads and rotors
Measured, not guessed. If a rotor can be saved we say so. If it cannot, you hear that before we cut it.
Calipers and hardware
Stuck sliders and seized pistons are why one side wears out first. We free them or replace them, not just slap pads on a frozen caliper.
Brake fluid and lines
Spongy pedal is often old fluid or a leak, not a pad problem. We pressure-test before we sell you an axle.
ABS and warning lights
Wheel-speed sensors, tone rings, and module faults scanned and confirmed, then quoted.
Sound familiar?
Squeal or grind when you stop
Squeal is usually the wear indicator. Grind is pads gone and rotors next. Do not wait for the weekend on a grind.
Pedal feels soft or sinks
Air in the system, a leak, or a master cylinder. That is a safety problem, not a comfort problem.
Steering wheel shakes when you brake
Warped or uneven rotors. Common after hard highway stops on 22 and 78. We measure runout instead of replacing on a hunch.
Car pulls to one side
A seized caliper or collapsed hose. Fixing only the noisy side is how you are back in two months.
Free computer diagnostic scan
With a qualifying repair. Additional diagnostic labor may be required depending on the concern.
Mention it when you call →$20 off service over $200
Valid on qualifying labor and repair services. Mention the offer before service begins.
Mention it when you call →Brakes questions
FAQ — BRAKESHow do I get a brake repair or labor-only quote?
Tell us the year, make and model, which axle needs work, and whether you already have parts. The shop must confirm parts compatibility, labor and warranty terms before accepting customer-supplied parts. An inspection may be needed for a final quote.
Do I need pads and rotors, or just pads?
Depends on thickness and surface. We measure both sides, show you what we see, and quote the honest option. No pad-slap on a rotor that is already too thin.
Can brake work be same-day?
Most pad and rotor jobs in Union are same-day or next-day if the parts are on the truck. Call first and we will hold a bay.
Is the work warrantied?
Yes. Parts and labor on the brakes we install. If something we did acts up, bring it back.
Can you pick the car up if it is unsafe to drive?
If our truck is free we will grab it in Union, Hillside, or Elizabeth and it comes straight to the bays. Call the shop and we will tell you straight.
Related work
SAME SHOP · SAME BAYSComputer Diagnostics
Same bays on Magie Ave. Diagnosis first, then a number you approve.
SERVICETires & Balancing
Same bays on Magie Ave. Diagnosis first, then a number you approve.
SERVICEOil Change & Maintenance
Same bays on Magie Ave. Diagnosis first, then a number you approve.
SERVICENJ Inspection Prep
Same bays on Magie Ave. Diagnosis first, then a number you approve.
TOWNBrakes for Hillside
Hillside borders Union directly, so the shop on Magie Ave is a few minutes away for most of town, straight down Liberty Ave or along Route 22.
TOWNBrakes for Elizabeth
The shop sits right along the Elizabeth line, so for the North Elizabeth and Westminster side of the city we're often closer than shops in Elizabeth itself.
TOWNBrakes for Springfield
Springfield connects to the shop straight down Morris Ave or Route 22 east, usually a little over ten minutes.
Full shop list: Auto repair · Towing & roadside
